Project 4 – Color Mixing Lamp

The code that was used:

const int greenLEDPin=9;
const int redLEDPin=11;
const int blueLEDPin= 10;
const int redSensorPin=A0;
const int greenSensorPin=A1;
const int blueSensorPin=A2;
int redValue=0;
int greenValue=0;
int blueValue=0;
int redSensorValue=0;
int greenSensorValue=0;
int blueSensorValue=0;
void setup(){
Serial.begin(9600);
pinMode(greenLEDPin,OUTPUT);
pinMode(redLEDPin,OUTPUT);
pinMode(blueLEDPin,OUTPUT);
}
void loop(){
redSensorValue=analogRead(redSensorPin);
delay(5);
greenSensorValue=analogRead(greenSensorPin);
delay(5);
blueSensorValue=analogRead(blueSensorPin);
Serial.print(“Raw Sensor Values \t Red: “);
Serial.print(redSensorValue);
Serial.print(“\t Green: “);
Serial.print(greenSensorValue);
Serial.print(“\t Blue: “);
Serial.println(blueSensorValue);
redValue=redSensorValue/4;
greenValue=greenSensorValue/4;
blueValue=blueSensorValue/4;
Serial.print(“Mapped Sensor Values \t Red: “);
Serial.print(redValue);
Serial.print(“\t Green: “);
Serial.print(greenValue);
Serial.print(“\t Blue: “);
Serial.print(blueValue);
analogWrite(redLEDPin, redValue);
analogWrite(greenLEDPin, greenValue);
analogWrite(blueLEDPin, blueValue);
}